Reading Time: 8 mins | Publish Date: 15 Jan 2025 | Update Date: 26 Apr 2025
How to Prepare for Implementing Cisco Collaboration Core Technologies (350-801 CLCOR)
Preparation Guide for Implementing Cisco Collaboration Core Technologies (350-801 CLCOR)
Introduction for Implementing Cisco Collaboration Core Technologies (350-801 CLCOR)
Implementing Cisco Collaboration Core Technologies v1.0 (CLCOR 350-801) is a 120-minute exam associated with the CCNP and CCIE Collaboration Certifications. This exam tests a candidate’s knowledge of implementing core collaboration technologies including infrastructure and design, protocols, codecs, and endpoints, Cisco IOS XE gateway and media resources, Call Control, QoS, and collaboration applications. Practice with CISCO 350-801 practice exam and CISCO 350-801 practice tests can help you with passing the exam easily.
You should be familiar with:
- Working knowledge of fundamental terms of computer networking, including LANs, WANs, switching, and routing
- Basics of digital interfaces, Public Switched Telephone Networks (PSTNs), and Voice over IP (VoIP)
- Fundamental knowledge of converged voice and data networks and Cisco Unified Communications Manager deployment
Exam Topics for Implementing Cisco Collaboration Core Technologies (350-801 CLCOR)
The following will be practiced in CISCO 350-801 practice exam and CISCO 350-801 practice tests:
- Infrastructure and design
- Protocols, codecs, and endpoints
- Cisco IOS XE gateway and media resources
- Call Control
- QoS
- Collaboration applications
Understanding functional and technical aspects of Implementing Cisco Collaboration Core Technologies (350-801 CLCOR) Infrastructure and design
The following will be discussed in CISCO 350-801 exam dumps:
- Describe the key design elements of the following, pertaining to the Cisco Collaboration architecture as described in the SRND/PA
- Licensing (Smart, Flex)
- Sizing
- Bandwidth
- High availability
- Disaster recovery
- Dial plan
- Security (certificates, SRTP, TLS)
- QoS
- Describe the purpose of Edge devices in the Cisco Collaboration architecture such as Expressway and Cisco Unified Border Element
- Configure these network components to support Cisco Collaboration solutions
- DHCP
- NTP
- CDP
- LLDP
- LDAP
- TFTP
- Certificates
- Troubleshoot these network components in a Cisco Collaboration solution
- DNS (A/AAA, SRV, Reverse Pointer Record (PTR))
- NTP
- LDAP integration on Cisco Unified Communications Manager
- Explain these components to support Cisco Collaboration solutions
- SNMP
- DNS
- Describe the Cisco Collaboration solutions architecture
- Compare the IP Phone signaling protocols of Session Initiation Protocol (SIP), H323, Media Gateway Control Protocol (MGCP), and Skinny Client Control Protocol (SCCP)
- Integrate and troubleshoot Cisco Unified Communications Manager with LDAP for user synchronization and user authentication
- Implement Cisco Unified Communications Manager provisioning features
- Describe the different codecs and how they are used to transform analogue voice into digital streams
- Describe a dial plan, and explain call routing in Cisco Unified Communications Manager
- Implement Public Switched Telephone Network (PSTN) access using MGCP gateways
- Implement a Cisco gateway for PSTN access
- Configure calling privileges in Cisco Unified Communications Manager
- Implement toll fraud prevention
- Implement globalized call routing within a Cisco Unified Communications Manager cluster
- Implement and troubleshoot media resources in Cisco Unified Communications Manager
- Describe Cisco Instant Messaging and Presence, including call flows and protocols
- Describe and configure endpoints and commonly required features
- Configure and troubleshoot Cisco Unity Connection integration
Understanding functional and technical aspects of Implementing Cisco Collaboration Core Technologies (350-801 CLCOR) Protocols, codecs, and endpoints
The following will be discussed in CISCO 350-801 dumps:
- Troubleshoot these elements of a SIP conversation
- Call set up and tear down
- SDP
- DTMF
- Identify the appropriate collaboration codecs for a given scenario
- Configure codec negotiations
- Deploy SIP endpoints
- Manual
- Self provisioning
- Bulk Administration Tool (BAT)
- Troubleshoot collaboration endpoints
- Configure and troubleshoot Cisco Unity Connection call handlers
- Describe how Mobile Remote Access (MRA) is used to allow endpoints to work from outside the company
- Analyze traffic patterns and quality issues in converged IP networks supporting voice, video, and data traffic
- Define QoS and its models
- Implement classification and marking
- Configure classification and marking options on Cisco Catalyst switches
- Describing the Cisco Collaboration Solutions Architecture
- Exploring Call Signaling over IP Networks
- Integrating Cisco Unified Communications Manager LDAP
- Implementing Cisco Unified Communications Manager Provisioning Features
- Exploring Codecs
- Describing Dial Plans and Endpoint Addressing
- Implementing MGCP Gateways
- Implementing Voice Gateways
- Configuring Calling Privileges in Cisco Unified Communications Manager
- Implementing Toll Fraud Prevention
- Implementing Globalized Call Routing
- Implementing and Troubleshooting Media Resources in Cisco Unified Communications Manager
- Describing Cisco Instant Messaging and Presence
- Enabling Cisco Jabber
Understanding functional and technical aspects of Implementing Cisco Collaboration Core Technologies (350-801 CLCOR) Cisco IOS XE gateway and media resources
The following will be discussed in CISCO 350-801 dumps:
- Configure these voice gateway elements
- DTMF
- Voice translation rules and profiles
- Codec preference list
- Dial peers
- Configure ISDN PRI/BRI
- Troubleshoot ISDN PRI/BRI
- Configure and verify the MGCP
- Identify the appropriate media resources for a given scenario (hardware and software)
- Configuring Cisco Unity Connection Integration
- Configuring Cisco Unity Connection Call Handlers
- Describing Collaboration Edge Architecture
- Analyzing Quality Issues in Converged Networks
- Defining QoS and QoS Models
- Implementing Classification and Marking
- Configuring Classification and Marking on Cisco Catalyst Switches
Understanding functional and technical aspects of Implementing Cisco Collaboration Core Technologies (350-801 CLCOR) Call Control
The following will be discussed in CISCO 350-801 dumps:
- Describe the Cisco Unified Communications Manager digit analysis process
- Implement toll fraud prevention on Cisco Unified CM
- Configure globalized call routing in Cisco Unified CM
- Route patterns (traditional and +E.164 format)
- Translation patterns
- Standard local route group
- Transforms
- SIP route patterns
- Describe Mobile and Remote Access (MRA)
- Using Certificates
- Configure IP Network Protocols
- Configure and Troubleshoot Collaboration Endpoints
- Troubleshoot Calling Issues
- Configure and Troubleshoot LDAP Integration in Cisco Unified Communications Manager
- Deploy an IP Phone Through Auto and Manual Registration
- Configure Self-Provisioning
- Configure Batch Provisioning
- Explore the Cisco VoIP Bandwidth Calculator
- Configure Regions and Locations
- Implement Endpoint Addressing and Call Routing
- Implement PSTN Calling Using MGCP Gateways
- Configure and Troubleshoot Integrated Services Digital Network (ISDN) Primary Rate Interface (PRI)
- Examine Cisco IOS Gateway Inbound and Outbound Dial-Peer Functions
- Implement and Troubleshoot Digit Manipulation on a Cisco IOS Gateway
Understanding functional and technical aspects of Implementing Cisco Collaboration Core Technologies (350-801 CLCOR) QoS
The following will be discussed in CISCO 350-801 dumps pdf:
- Describe problems that can lead to poor voice and video quality
- Latency
- Jitter
- Packet loss
- Bandwidth
- Describe the QoS requirements for these application types (voice and video)
- Describe the class models for providing QoS on a network
- 4/5 Class model
- 8 Class model
- QoS Baseline model (11 Class)
- Describe the purpose and function of these DiffServ values as it pertains to collaboration
- EF
- AF41
- AF42
- CS3
- CS4
- Describe QoS trust boundaries and their significance in LAN-based classification and marking
- Describe and determine location-based CAC bandwidth requirements
- Configure and verify LLQ (class map, policy map, service policy)
- Configure Calling Privileges
- Implement Toll Fraud Prevention on Cisco Unified Communications Manager
- Implement Globalized Call Routing
- Deploy an On-Premise Cisco Jabber Client for Windows
- Configure the Integration Between Unity Connection and Cisco UCM
- Manage Unity Connection Users
- EAI: Configure QOS
Understanding functional and technical aspects of Implementing Cisco Collaboration Core Technologies (350-801 CLCOR) Collaboration applications
The following will be discussed in CISCO 350-801 dumps:
- Configure Cisco Unity Connection mailbox and MWI
- Configure Cisco Unity Connection SIP integration options to call control
- Describe Cisco Unity Connection call handlers
- Describe Cisco Unified IM&P protocols and deployment
- XMPP
- High availability
- Deploy Cisco Jabber on premises
How to schedule Implementing Cisco Collaboration Core Technologies (350-801 CLCOR)
- Log into your account at Pearson VUE
- Select Proctored Exams and enter the exam number 350-801
- Follow the prompts to register
Certification Path for Implementing Cisco Collaboration Core Technologies (350-801 CLCOR)
This course will help you:
- Integrate and troubleshoot Cisco Unified Communications Manager with Lightweight Directory Access Protocol (LDAP) for user synchronization and user authentication
- Implement Cisco Unified Communications Manager provisioning features
- Configure and troubleshoot collaboration endpoints
- Earn 64 credits toward recertification
This exam is for:
- Students preparing to take the CCNP Collaboration certification
- Network administrators
- Network engineers
- Systems engineers
What is the cost of Implementing Cisco Collaboration Core Technologies (350-801 CLCOR)
- Format: Multiple choices, multiple answers
- Length of Examination: 90 minutes
- Number of Questions: 90-105
- Passing Score: 70%
The benefit in Obtaining the Implementing Cisco Collaboration Core Technologies (350-801 CLCOR)
This exam will help you:
- Configure, troubleshoot, and manage enterprise wired and wireless networks
- Implement security principles within an enterprise network
- Earn 64 CE credits toward recertification
This exam is for:
- Mid-level network engineers
- Network administrators
- Network support technicians
- Help desk technicians
Difficulty in Attempting Implementing Cisco Collaboration Core Technologies (350-801 CLCOR)
There are two main types of resources for preparation of certification exams first there are the study guides and books that are detailed and suitable for building knowledge from ground up then there are video tutorials and lectures that can somehow ease the pain of through study and are comparatively less boring for some candidates yet these demand time and concentration from the learner.
Smart Candidates who want to build a solid foundation in all exam topics and related technologies usually combine video lectures with study guides to reap the benefits of both but there is one crucial preparation tool as often overlooked by most candidates the practice exams. CISCO 350-801 practice tests and CISCO 350-801 practice exams are a great way to prepare for this exam. Practice exams are built to make students comfortable with the real exam environment. Statistics have shown that most students fail not due to that preparation but due to exam anxiety the fear of the unknown.
Certification-questions.com expert team recommends you to prepare some notes on these topics along with it don’t forget to practice 840-450 Exam dumps which had been written by our expert team, Both these will help you a lot to clear this exam with good marks.
For more info about Implementing Cisco Collaboration Core Technologies (350-801 CLCOR)
Implementing Cisco Collaboration Core Technologies (350-801 CLCOR)