70-537 PDF Dumps

How to use our free microsoft 70-537 PDF Dumps

Our Free 70-537 PDF dumps are based on the full 70-537 mock exams which are available on our Web Site. The microsoft 70-537 PDF consists in questions and answers with detailed explanations.
You can use the PDF 70-537 practice exam as a study material to pass the 70-537 exam, and don't forget to try also our 70-537 testing engine Web Simulator.

On-Line Users: {{voteInfo.result.viewUsers}}
Subscribed Users: {{voteInfo.result.subscribedUsers}}
Thank you for your vote {{voteInfo.result.stars}} Your vote has already been submitted ({{voteInfo.result.votingPeople}} votes)

Follow us on SlideShare to see the latest available 70-537 tests pdf.

										
											Q1.NOTE: This question is part of a series of questions that present the same scenario. Each question in
the series contains a unique solution that might meet the stated goals. Some question sets might have
more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these
questions will not appear in the review screen.
You have an Azure Stack integrated system that runs in a connected environment. 
You need to recommend an interval for installing Microsoft software update packages to Azure Stack. The
solution must ensure that you can receive Microsoft support. 
Solution: You recommend that Microsoft software updates be installed monthly.
Does this meet the goal?
 - A:   Yes
 - B:   No

 solution: A

Explanation:
For your Azure Stack deployment to remain in support, it must run the most recently released update version or
run either of the two preceding update versions. 
Microsoft will release update packages for Azure Stack integrated systems on a regular cadence that will
typically fall on the fourth Tuesday of every month.
Thus to remain in support you must be running one of the last three update versions and, as an update version
is released every month, you need to install updates at least every three months.
References:
https://docs.microsoft.com/en-us/azure/azure-stack/azure-stack-servicing-policy
https://docs.microsoft.com/en-us/azure/azure-stack/azure-stack-updates


Q2.NOTE: This question is part of a series of questions that present the same scenario. Each question in
the series contains a unique solution that might meet the stated goals. Some question sets might have
more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these
questions will not appear in the review screen.
You have an Azure Stack integrated system that runs in a connected environment. 
You need to recommend an interval for installing Microsoft software update packages to Azure Stack. The
solution must ensure that you can receive Microsoft support. 
Solution: You recommend that Microsoft software updates be installed every six months.
Does this meet the goal?
 - A:   Yes
 - B:   No

 solution: B

Explanation:
For your Azure Stack deployment to remain in support, it must run the most recently released update version or
run either of the two preceding update versions. 
Microsoft will release update packages for Azure Stack integrated systems on a regular cadence that will
typically fall on the fourth Tuesday of every month.
Thus to remain in support you must be running one of the last three update versions and, as an update version
is released every month, you need to install updates at least every three months.
References:
https://docs.microsoft.com/en-us/azure/azure-stack/azure-stack-servicing-policy
https://docs.microsoft.com/en-us/azure/azure-stack/azure-stack-updates


Q3.NOTE: This question is part of a series of questions that present the same scenario. Each question in
the series contains a unique solution that might meet the stated goals. Some question sets might have
more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these
questions will not appear in the review screen.
You have an Azure Stack integrated system that runs in a connected environment. 
You need to recommend an interval for installing Microsoft software update packages to Azure Stack. The
solution must ensure that you can receive Microsoft support. 
Solution: You recommend that Microsoft software updates be installed every 12 months.
Does this meet the goal?
 - A:   Yes
 - B:   No

 solution: B

Explanation:
For your Azure Stack deployment to remain in support, it must run the most recently released update version or
run either of the two preceding update versions. 
Microsoft will release update packages for Azure Stack integrated systems on a regular cadence that will
typically fall on the fourth Tuesday of every month.
Thus to remain in support you must be running one of the last three update versions and, as an update version
is released every month, you need to install updates at least every three months.
References:
https://docs.microsoft.com/en-us/azure/azure-stack/azure-stack-servicing-policy
https://docs.microsoft.com/en-us/azure/azure-stack/azure-stack-updates


Q4.NOTE: This question is part of a series of questions that present the same scenario. Each question in
the series contains a unique solution that might meet the stated goals. Some question sets might have
more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these
questions will not appear in the review screen.
You have an Azure Stack integrated system that runs in a connected environment. 
You need to recommend an interval for installing Microsoft software update packages to Azure Stack. The
solution must ensure that you can receive Microsoft support. 
Solution: You recommend that Microsoft software updates be installed every three months.
Does this meet the goal?
 - A:   Yes
 - B:   No

 solution: A

Explanation:
For your Azure Stack deployment to remain in support, it must run the most recently released update version or
run either of the two preceding update versions. 
Microsoft will release update packages for Azure Stack integrated systems on a regular cadence that will
typically fall on the fourth Tuesday of every month.
Thus to remain in support you must be running one of the last three update versions and, as an update version
is released every month, you need to install updates at least every three months.
References:
https://docs.microsoft.com/en-us/azure/azure-stack/azure-stack-servicing-policy
https://docs.microsoft.com/en-us/azure/azure-stack/azure-stack-updates


Q5.NOTE: This question is part of a series of questions that present the same scenario. Each question in
the series contains a unique solution that might meet the stated goals. Some question sets might have
more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these
questions will not appear in the review screen.
You have an Azure Stack integrated system that contains four nodes named Node1, Node2, Node3 and
Node4. 
You plan to replace Node2.
You need to drain the active workloads that run on Node2.
Solution: From Node1, you run the Repair-AzsScaleUnitNode cmdlet.
Does this meet the goal?
 - A:   Yes
 - B:   No

 solution: B

Explanation:
The Drain action evacuates all active workloads by distributing them among the remaining nodes in that
particular scale unit.
To run the drain action through PowerShell, use the Disable-AzsScaleUnitNode cmdlet.
Incorrect Answers:
A: The Repair-AzsScaleUnitNode cmdlet repairs the node. It does not drain the node.
References: https://docs.microsoft.com/en-us/azure/azure-stack/azure-stack-replace-node


Q6.NOTE: This question is part of a series of questions that present the same scenario. Each question in
the series contains a unique solution that might meet the stated goals. Some question sets might have
more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these
questions will not appear in the review screen.
You have an Azure Stack integrated system that contains four nodes named Node1, Node2, Node3 and
Node4. 
You plan to replace Node2.
You need to drain the active workloads that run on Node2.
Solution: From the hardware lifecycle host, you run the Stop-AzsScaleUnitNode cmdlet.
Does this meet the goal?
 - A:   Yes
 - B:   No

 solution: B

Explanation:
The Drain action evacuates all active workloads by distributing them among the remaining nodes in that
particular scale unit.
To run the drain action through PowerShell, use the Disable-AzsScaleUnitNode cmdlet.
Incorrect Answers:
A: The Stop-AzsScaleUnitNode cmdlet turns off the node. It's the same as if you press the power button. It
does not send a shutdown signal to the operating system. For planned power off operations, make sure you
drain a scale unit node first.
References: https://docs.microsoft.com/en-us/azure/azure-stack/azure-stack-replace-node


Q7.NOTE: This question is part of a series of questions that present the same scenario. Each question in
the series contains a unique solution that might meet the stated goals. Some question sets might have
more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these
questions will not appear in the review screen.
You have an Azure Stack integrated system that contains four nodes named Node1, Node2, Node3 and
Node4. 
You plan to replace Node2.
You need to drain the active workloads that run on Node2.
Solution: From the hardware lifecycle host, you run the Disable-AzsScaleUnitNode cmdlet.
Does this meet the goal?
 - A:   Yes
 - B:   No

 solution: A

Explanation:
The Drain action evacuates all active workloads by distributing them among the remaining nodes in that
particular scale unit.
To run the drain action through PowerShell, use the Disable-AzsScaleUnitNode cmdlet.
References: https://docs.microsoft.com/en-us/azure/azure-stack/azure-stack-replace-node


Q8.NOTE: This question is part of a series of questions that present the same scenario. Each question in
the series contains a unique solution that might meet the stated goals. Some question sets might have
more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these
questions will not appear in the review screen.
You have an Azure Stack integrated system that contains four nodes named Node1, Node2, Node3 and
Node4. 
You plan to replace Node2.
You need to drain the active workloads that run on Node2.
Solution: You connect to the BMC web interface on Node2 and power off the node.
Does this meet the goal?
 - A:   Yes
 - B:   No

 solution: B

Explanation:
The Drain action evacuates all active workloads by distributing them among the remaining nodes in that
particular scale unit.
To run the drain action through PowerShell, use the Disable-AzsScaleUnitNode cmdlet.
Incorrect Answers:
A: The BMC web interface on Node2 can be used to power off the node. This does not send a shutdown signal
to the operating system. For planned power off operations, make sure you drain a scale unit node first.
References: https://docs.microsoft.com/en-us/azure/azure-stack/azure-stack-replace-node


Q9.NOTE: This question is part of a series of questions that present the same scenario. Each question in
the series contains a unique solution that might meet the stated goals. Some question sets might have
more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these
questions will not appear in the review screen.
You have an Azure Stack integrated system that uses a Microsoft Azure Active Directory (Azure AD) domain
named contoso.com as the identify provider. The system has a tenant subscription that contains several
resources.
In contoso.com, you can create a new user named User1. 
User1 reports that when signed in to the Azure stack user portal, no resources are displayed. 
You need to ensure that User1 can view the resources on the portal. 
Solution: On the Default Provider Subscription, you assign a role to User1.
Does this meet the goal?
 - A:   Yes
 - B:   No

 solution: B

Explanation:
There are two portals in Azure Stack; the administrator portal and the user portal (sometimes referred to as the
tenant portal.)
The Default Provider Subscription is the administrator portal.  The user needs to be assigned a role in the
tenant (user) subscription, not the Default Provider (admin) subscription.
References:
https://docs.microsoft.com/en-us/azure/azure-stack/azure-stack-manage-portals


Q10.NOTE: This question is part of a series of questions that present the same scenario. Each question in
the series contains a unique solution that might meet the stated goals. Some question sets might have
more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these
questions will not appear in the review screen.
You have an Azure Stack integrated system that uses a Microsoft Azure Active Directory (Azure AD) domain
named contoso.com as the identify provider. The system has a tenant subscription that contains several
resources.
In contoso.com, you can create a new user named User1. 
User1 reports that when signed in to the Azure stack user portal, no resources are displayed. 
You need to ensure that User1 can view the resources on the portal. 
Solution: On the tenant subscription, you assign the Reader role to User1.
Does this meet the goal?
 - A:   Yes
 - B:   No

 solution: A

Explanation:
Explanation: 
A user needs at least the reader role to be able to view resources in a tenant subscription.